Lockable line valves:

The Connect Medical Systems Lockable Line Valve is suitable for new and existing applications which require a system of secure but easily accessible medical gas isolation valves within a restricted area.

The unit is designed to be mounted directly into a medical or laboratory gas pipeline via the copper tail-pieces supplied, and located within wall or ceiling voids or anywhere that general access is restricted.

Valves can be provided with a blanking facility as a secondary means of isolation to provide a physical barrier to the gas supply in order to eliminate any risk of contamination during initial installation and upgrade.

Valves van be supplied with optional NIST fittings up and/or down stream, incorporating a 100% leak tight seal in the gas specific NIST connector. Other options include pressure switches, pressure gauges and multiple valve boxes.

AVSU:

The Connect Medical Systems Area Valve Service Unit (AVSU) is suitable for new build or extension applications which require a system of secure but accessible medical gas isolation valves.

The unit is designed to be either surface mounted to eliminate builders works or flush mounted into recessed or studded walls. The unit is connected directly to the medical gas mains pipe-work using copper tail pieces supplied as part of the whole assembly.

Each valve is supplied with a blank spade which can be fitted in place of a through spade to form a physical barrier for engineering work to be carried out up or down stream of the valve.

Each valve incorporates 100% shut-off valves within the gas specific NIST connector. All seals can be easily removed to aid installation and future maintenance. Full steel construction front cover and back plate improve fire rating.

AVS Midwall:

The Connect Medical Systems Area Valve Service Unit (AVSU) is suitable for new build or extension applications which require a system of secure but accessible medical gas isolation valves.

The unit is designed to be either surface mounted to eliminate builders works or flush mounted into recessed or studded walls. The unit is connected directly to the medical gas mains pipe-work using copper tail pieces supplied as part of the whole assembly.

Each valve is supplied with a blank spade which can be fitted in place of a through spade to form a physical barrier for engineering work to be carried out up or down stream of the valve.

Each valve incorporates 100% shut-off valves within the gas specific NIST connector. All seals can be easily removed to aid installation and future maintenance. Full steel construction front cover and back plate improve fire rating.

AVSU Module:

The Connect Medical Systems Are Valve Service Unit Module (AVSUM) is suitable for new and existing applications which require a system of secure but easily accessible medical gas isolation valves within an open area.

The unit is designed to be either surface mounted, which effectively eliminates builders’ works, or flush mounted into recessed or studded walls. The unit is connected directly into the medical gas main via the copper tail-pieces provided.

Each valve is provided with a blanking facility as a secondary means of isolation in order to eliminate any risk of contamination during initial installation and upgrade.

Gas Identification Tape

We offer a range of Medical gas pipeline identification tapes with standard printed texts to identify pipeline contents.

Medical gas pipeline identification tape can be used in difficult high temperature conditions for permanent marking of medical gas pipeline systems.

The tape is strong and durable and manufactured from vinyl polypropylene laminate material which provides lasting resistance to wear and cleaning chemicals and is suitable for application to copper, steel and stainless steel pipelines.

Medical Gas Identification tape is supplied in standard widths of 150mm for identification of pipeline contents and 50mm wide for direction of flow (arrow tape).

The reverse of the tape has a permanent rubber adhesive for long lasting use and is suitable for use in high temperature.

The tape is supplied as standard with the CMS branded logo or can be provided with customers own identification to special order.

Special tapes or specific markings can be supplied to order.